Stil Modeling Liquid 1000 ml

Usage Area and Features:

• This is a specially designed product that encompasses all the characteristics required in a porcelain liquid and contains all the artistic nuances.
• It can be easily used in both metal-free and metal-supported porcelain crown bridge works.
• If desired, it can also be used for very liquid consistency work.
• It is particularly designed for boutique laboratories involved in artistic and aesthetic works.
• Ideal for fine-grained porcelain powders that pose modeling risks.
• Compatible with every brand of porcelain powder.
• It does not flow during work, providing comfortable and enjoyable modeling in a paste-like consistency.
• It helps to create more aesthetic crowns by preserving the given anatomical form.
• It ensures that the porcelain powder mixture remains at the same consistency for a long time without drying out.
• After firing, it achieves completely natural colors without causing color deviation.
• If the recommendations are followed, minimum shrinkage rates are achieved after firing.
• Extremely sintered, pore-free, and durable porcelain is obtained.
• Available in both summer and winter versions for working in different seasons.

Usage and Recommendations:

• Place the necessary amount of porcelain powder on your working glass.
• Drip Stil Modeling Liquid onto your powder.
• Stir well until you reach the desired working consistency.
• If possible, use a glass spatula for mixing.
• Renew the washing water of the brush you use during work each time, preferably using distilled water.
• Wash and clean the brush sponge to remove excess water.
• During and after work, thoroughly absorb excess liquid with a paper towel, etc.
• Never vibrate as it will disrupt the natural arrangement of particles and evaporation gaps.
• If there is enough time after finishing your work, let large bridges stand on a paper towel, etc., for 1-2 minutes.
• Ensure the calibration settings of your oven. Store at room temperature (0-29C). Do not refrigerate.
• Follow the recommended program to achieve the best results.

Starting Temperature: 500C

Pre-Drying Time: 6 min

Vacuum Start: 500C

Vacuum Finish: Equivalent to Max temperature

Packaging: 1000 ml plastic containers